Description

LINKSAFE MLS 3526 provides Layer 2 and Layer 3 packet forwarding features. With up to 56 Gbps forwarding capability, LINKSAFE MLS 3526 is suitable for business or organization of all scales.

Network interfaces include: 22 x 1GE, 2 x 2.5GE and 2 x SFP+ uplinks;
Size: 1RU;
56 Gbps switching capacity;
Supports L2 switching and L3 routing.

High performance – Access ports with speeds up to 10 Gigabit provide high-bandwidth connectivity for clients, servers, and storage.

Easy to upgrade – Flexibility in updating software and functions locally or remotely, easy to configure and use.

SD-WAN & SASE – Integrating the capabilities of leading security and networking solutions (SD-WAN & SASE) enables efficient and secure connectivity.

Detailed Features

I.	Interface
1.1	Ethernet Ports	22 x 1GE 2 x 2.5GE
1.2	Ethernet Ports	2 x SFP+
1.3	Management ports	1 x RJ45-to-RS232 serial port 1 x USB 2.0
1.4	LED	System: PWR/DC/MGMT/SYS Ports: LNK/ACT
II.	Layer 2 Function
2.1	Transparent bridging	Auto learning MAC address or Static learning MAC address
2.2	Loop Prevention	STP/RSTP/MSTP
2.3	802.1q VLAN	Support 4K VLAN ID, 128 VLAN Active and mode Access/Trunk interface.
2.4	Port Mirroring	Rx/Tx/Both Mode
2.5	802.1AB Link Layer Discovery Protocol	Enable/Disable mode
2.6	Link Aggregation	IEEE 802.3ad LACP/static trunk
2.7	QoS	8 priority queues on all switch ports Supports strict priority and Weighted Round Robin (WRR) CoS policies Traffic classification: – IEEE 802.1p CoS/ToS – IPv4/IPv6 DSCP – Port-based WRR
2.8	Multicast	IPv4 IGMP v1/v2/v3 snooping; IPv4 Querier mode support IPv6 MLD v1/v2 snooping; Multicast VLAN Register (MVR) Up to 2K multicast groups (IPv4 + IPv6)
2.9	Access Control List	Supports Standard and Expanded ACL; IP-based ACL/MAC-based ACL; Time-based ACL; Up to 1K entries
2.10	Authentication	IEEE 802.1x port-based network access control AAA authentication: TACACS+ and IPv4/IPv6 over RADIUS
III.	IPv4 Layer 3 Functions
3.1	IP Routing Protocol	Static route; RIPv1/v2; OSPFv2; BGPv4; Policy-based routing (PBR); LPM routing (MD5 authentication)
3.2	Multicast Routing Protocol	IGMP v1/v2/v3 ; DVMRP; PIM-DM/SM; PIM-SSM

IV.	IPv6 Layer 3 Functions
4.1	IP Routing Protocol	RIPng; OSPFv3; BGPv4+; IPv6 LPM Routing; IPv6 Policy-based Routing (PBR)
4.2	Multicast Routing Protocol	PIM-SM/DM for IPv6; MLD for IPv6 (v1); MLDv1/v2; MLD Snooping, 6 to 4 Tunnels; IPv6 Any Cast RP; Multicast receive control; Illegal multicast source detect
4.3	Other	ICMPv6, ND, DNSv6
V.	VPN
5.1	IPsec VPN	Mode: LAN-to-LAN and Client-to-LAN; IPsec VPN Encryption: AES-CBC, AES ; GCM-128/192/256, DES, DES; Authentication: MD5, SHA1, Manual, IKE Key Management Mode ; Supported NAT-Traversal (NAT-T)
VI.	Management Features
6.1	Management Interface	Web/CLI/Telnet
6.2	Remote Management	Web GUI, NetConf/YANG
6.3	Configuration	Export & Import, NTP Synchronize; Syslog Support
VII.	Dimensions and Power
7.1	Dimensions (W x D x H)	440 x 240 x 43.6 mm, 1U height
7.2	Power Consumption	26 watts/88.66 BTU
7.3	Power Requirements	AC 100~240V, 50/60Hz
7.4	Operating	Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 90% (non-condensing)
7.5	Storage	Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 90% (non-condensing)

Documents

Download the detailed document about the product LINKSAFE MLS 3526

LINKSAFE MLS 3526

Description

Detailed Features

Documents

LANCS NETWORKS

Get In Touch with Us